Packet loss from Mac to Amplifi
Jarle Dahl Bergersen last edited by
Frequently, but without any set rhyme or reason, I get serious packet loss between my iMac and the Amplify router.
At the moment I am only using the router and no mesh points.
The Amplifi is set up in bridge mode, with a Fritzbox 7940 connected to the fibre connection.
3 or 4 meters away from it I have my main computer - an iMac, connected to it via Wi-fi.
Most of the time it works brilliantly, but sometimes it randomly start having a lot of packet loss between the iMac and the Amplifi.
I always run ping in the background these days, so I see it when it happens. Thought it might be a fault with the Amplifi, so had it sent away and got a new one. But the new one is behaving in the exact same way.
What is strange is that if I turn off Wi-fi on the iMac and turn it on again, the packet loss goes away.
Yes I know, should be a strong indication that its something wrong with the iMac. But I randomly have problems with other devices (other Macs, iPhones, iPads etc) and the fix always seems to be to turn off wi-fi and then turn on wi-fi again.
Another thing that makes me think its not as easy as just the devices being the problem is that I was using my old Apple Extreme when the Amplifi was away, and that was rock solid with no packet loss. Although I did see some high ping times (+100 ms) to the Fritzbox from time to time.
Anyone else experience this problem with the Amplifi and Apple devices? Any suggestions for fixes?
Jonathan Eyler-Werve last edited by
Similar story here. Also dropping packets from other OS devices (Nokia 7, Nokia 6). Close to unusable. Seems most noticeable with async web calls rather than web page loads, possibly because of retry handling?
Firmware is current.
There are several threads about this. What is Amplifi doing for us?
UI-Brett last edited by UI-Brett
@Jonathan-Eyler-Werve This is an older thread, and since 2018 major changes have been made, which means the issue you are experiencing is most likely different. Can you please describe in details what you are seeing and experiencing, and if possible can you download support files from your AmpliFi router right after you experience the issue?