V2.7 Firmware performance


  • Seeing some pretty erratic throughput, here is an iperf run that is fairly typical:

    MBP-Home:~ johnfruehe$ iperf3 -c 192.168.1.30iperf3 -c 192.168.1.30
    Connecting to host 192.168.1.30, port 5201
    [ 4] local 192.168.1.181 port 51886 connected to 192.168.1.30 port 5201
    [ ID] Interval Transfer Bandwidth
    [ 4] 0.00-1.00 sec 48.3 MBytes 405 Mbits/sec
    [ 4] 1.00-2.00 sec 27.0 MBytes 225 Mbits/sec
    [ 4] 2.00-3.00 sec 147 KBytes 1.21 Mbits/sec
    [ 4] 3.00-4.00 sec 147 KBytes 1.20 Mbits/sec
    [ 4] 4.00-5.01 sec 0.00 Bytes 0.00 bits/sec
    [ 4] 5.01-6.00 sec 0.00 Bytes 0.00 bits/sec
    [ 4] 6.00-7.00 sec 41.7 MBytes 351 Mbits/sec
    [ 4] 7.00-8.00 sec 48.3 MBytes 405 Mbits/sec
    [ 4] 8.00-9.00 sec 51.4 MBytes 431 Mbits/sec
    [ 4] 9.00-10.00 sec 51.1 MBytes 429 Mbits/sec


    [ ID] Interval Transfer Bandwidth
    [ 4] 0.00-10.00 sec 268 MBytes 225 Mbits/sec sender
    [ 4] 0.00-10.00 sec 268 MBytes 225 Mbits/sec receiver

    iperf Done.

    The 400Mb/s+ numbers are great, those are some of the highest that I have ever seen, but the 0Mb/s dropouts are concerning. I know the firmware is pretty new and it may take some time for everything to settle in.


Log in to reply