Amplifi HD LAN and WLAN both die
My setup is three Amplifi HDs: One is connected to my modem and acts as router. The other two are connected by ethernet cables to the router and act as mesh points. This has been working fairly well for a year or so although my family members are hard to please when it comes to wireless network speeds...
For the last days, approximately since updating to firmware 3.1.0, the complaining about slow and unstable wireless networking has increased in intensity.
I must admit that my Samsung Galaxy S8 has joined in and complains regularly that although it is connected to the wireless network, «the internet is maybe not available». And I have to agree, when the phone says that the internet is maybe not available, it really isn’t - not on the phone, anyway. My iPad Pro, on the other hand, is generally happy. So, a hard case to investigate.
However, on Thursday afternoon and again late Saturday evening, the following happened: All network access ceased for the entire house - LAN as well as WLAN. No SSIDs broadcast, no LAN working, and the Amplifi HD router showed the Amplifi logo and four dashes instead of the logo and time/date. Cutting the power to the router and then re-energizing it fixed the network (the mesh points did not need to be powered down - just the router).
This is, of course, a major problem. If I can’t trust the router to stay online, I’ll have to chuck it (and the mesh points) out, but clearly something is not quite right. Is it due to the latest firmware update. Could it be a hardware failure? How do I figure that out?
Any help or guidance would be appreciated.
Ali Hadi last edited by
@tom-nestli What mode is you AmpliFi operating under (DHCP or Bridge)? Also might be worth trying to do a full reset of all the units and setting them up again (if it is not too much hassle losing all your original settings) to see if that would fix it.
I had hoped not having to factory reset the units. I have quite a few static IPs and port forwards...
Derek Saville last edited by
Hi @tom-nestli - have you also been cutting the power to the modem and resetting it?
Updates can occur on the ISP side and to the modem, and I have found it can take a few power cycles of a modem as well as the AmpliFi HD router to get a good stable connection again
@derek-saville I will try powering down and up of the modem again, although I have tried earlier.
Tony St. Clair 0 last edited by
@tom-nestli You can back up settings using the web interface before doing a factory reset. I assume that saves the port forwards, but never tried it myself.
@tony-st-clair-0 I did not know that was possible. Thanks for pointing that out.
I've rebooted the modem. Twice. That's not improving the situation much.
I've now also factory reset the three Amplifi HDs (the router and the mesh points). Back up from the web interface helped restoring the router. It backed up DHCP settings (static leases), but it did not back up port forwards, so that was a bit of work setting them back up (ability to do setup like that on the web interface would make it easier than doing it on the cell phone, but that is unfortunately not possible. Why?).
I'll let the system do its thing for a day or three and then report back here.
Derek Saville last edited by
Do you use custom DNS servers?
Would you consider rolling back the firmware and/or temporarily going on to Beta firmware?
Simon P last edited by Simon P
I had seemlingly the same problem.
For the time you should downgrade your firmware to firmware version 3.0.1 (via amplifi.lan) and all will return to working order again. Currently going to try a beta firmware which hopefully fixes things.
I also have an S8 by the way
@simon-p Thank you for sharing a fix for this! Did you work with support and generate support files so we can try and identify what is causing this issue?
Simon P last edited by
@ui-brett yes, I'm still in contact with Becky. I just messaged her to ask how to get the beta up and running and waiting for her reply.
Simon P last edited by
Short update for @Tom-Nestli :
After the help of @UI-Brett and Becky from the helpdesk I'm running the beta firmware for 30 minutes and the connection is still stable. Looks real promissing!
Current firmware version I'm testing: 3.1.1rc3
After factory resetting the HDs I've not had the LAN and WLAN die on me (but then it's only been less than 24 hours).
However, I have had DNS problems arising during the night. I did have DNS problems earlier as well, and resolved those by Bypassing the DNS cache (from the web UI). Bypassing the DNS cache now seems to have resolved the DNS problem.
I've noticed that version 3.1.1 has been released. It's not yet available for me - according to the web UI (support->update), but I'll keep a look out for it and update when available.
I did, by the way, notice that others have reported similar problems on reddit (https://www.reddit.com/r/AmpliFi/comments/cojucm/updated_to_310_network_dropping/), so I suspect, as you guys have indicated, that there is in fact a problem with version 3.1.0.
If the problems persist I'll generate support files and ask @UI-Brett & co to have a look them, but it seems logical to wait until after updating to 3.1.1.
I updated to 3.1.1 3 days 20 hours ago and have not had the LAN/WLAN die on me since. That's good.
However, I still seem to have DNS issues and have to select Bypass DNS cache from the web UI.
@tom-nestli Thank you for reporting an update for us! (with specific run time I might add)