Separate 2.4 GHz and 5 GHz networks
Robin French last edited by
I have 2 some devices that will only work on a 2.4GHz network and others that will only work properly on a 5GHz one. Selecting Band Steering doesn't help the former.
Is it possible to have 2 different networks, one for each band, operating from one hardware system. If not and I add another Amplifi hardware set, how would I connect it to my WAN, could it operate through one of the original system's LAN ports?
UI-Brett last edited by
@robin-french Yes, you can create an additional SSID that is 2.4Ghz only: https://help.amplifi.com/hc/en-us/articles/360010201854-Adding-an-Additional-SSID
Derek Saville last edited by
Hi @ui-brett - sure would be nice if the main SSID could be configured “5 GHz ONLY” and 2.4 GHz enabled only on demand per mesh point as needed...