Amplifi HD 3.3.0rc1
-
I would appreciate release notes for firmware 3.3.0rc1. Can't seem to find them anywhere on the site.
-
@wouter-van-nispen-tot-sevenaer here there are:
AmpliFi release candidate firmware version 3.3.0rc1 has been released to beta.Firmware changes from the previous version 3.1.2:
Adjusted ethernet switch buffers sizes
Resolved remote connection issue
Added ability to name additional SSID for each radio separately
Added DNS-based AD blocker (enable in WebUI)
Added ability to remove remote access (WebUI -> Support -> Tools)
Added spanning tree protocol to protect against ethernet loops (disabled by default, enable in WebUI)
LCD will now show full version string when a beta update is available (e.g. 3.3.0rc3 instead of 3.3.0)
Multiple internal fixes and improvements
Any feedback is welcome, but especially about the following:If system stability and performance has improved
If spanning tree protocol resolved any LAN problems
If Apple Watch or Wi-Fi-connected printer had connectivity when 802.11r option was enabled.Linked with this post
-
Where is the ad blocker enabled for the non-Alien router? I don't see it in the Web UI.
-
Hi @ken-macinnis - are you running Beta firmware 3.3.0rc1?
The Add Blocker only appears in the latest Beta firmware when using DHCP mode with the "Bypass DNS Cache" option also disabled
The Ad Blocker option will not show up if you are in Bridge mode or when "Bypass DNS Cache" is enabled
-
What is the difference with 3.3.0rc3?
-
@Mark-Buckwell it does not pick the nearest mesh point and always connects to the base
-
@Mark-Buckwell and the intermediate mesh point has gone from 86% signal to 100%
-
What is the difference with 3.3.0rc3?
Hi @Mark-Buckwell - from @UI-Karlis...v3.3.0.rc3 Candidate Notes:
Changes from the previous version 3.3.0rc1:
- Added ability to select a device icon (apps to be released soon)
- Fixed unresponsive DNS server
- Updated the list of allowed Wi-Fi channels and their power limits for several countries.
- Mostly European countries affected where additional channels with reduced power are now available for manual selection.
- Added port forwarding rules and icon selection to settings backup and restore
- Improved internal diagnostics
- Minor fixes
Any feedback is welcome, especially about system stability and performance.
If you notice system instability, then restart the system, collect several support info files leading to instability and email me the files to [email address removed].
-
@Mark-Buckwell OK, fixed by rebooting both mesh points. One that was 63% is now 100%
-
This post is deleted!
