Config 2 Router Amplifi Instanr as Mech
-
Hi Team,
I buy amplifi instant set 2 box that have 1 afi-ins-r and 1 afi-ins-p in 1 box. I already setup for one box it work fine. For the second box can i connect the new afi-ins-r to the 1 afi-ins-r via mech. I attached the diagram how i want to deploy.
-
@sublime-lab2020 yes you can. see under add amplifi hd
-
@Raghu-Kannan i already the testing to mesh instant router to instant router still cannot.
-
Hi @sublime-lab2020 - please confirm that you have one AmpliFi Instant System (with a router and a mesh point) and one AmpliFi Instant Router (router only)?
Is so, which Instant router is the primary router that was installed first?
-
@Derek-Saville I have 2 afi-ins-r and 2 afi-ins-p.
Can I install like this
first (A)afi-ins-r is connected to internet then I am using another (B)afi-ins-r I want to mesh with (A)afi-ins-r. Then another 2afi-ins-p I want to mesh with (A)afi-ins-r .
-
Hi @sublime-lab2020 - no, that will not work
Only one Instant System can be part of a mesh, and the Instant Router from the system must be the primary router installed first
Only standalone routers can be then be added to the mesh as additional access points
So you would need to use one Instant System + two additional standalone Instant Routers to create the mesh as shown